CAREFUL
Reduces mechanical stress on the engine and water hammer
FUNCTIONAL
Complete starting solution with overload and short circuit protection.
ADJUSTABLE
Simple trimmers for setting the ramps and motor torque
MAIN FEATURES
MAIN FEATURES
- Auxiliaries contacts and circuits in low voltage;
- Normally open contact for start;
- Normally open contact for minimum level/pressure contact;
- Selector for Auto-Off-Manual (stable) operation; - Manual: direct operation without controls; - Automatic: operation with control by minimum level/pressure and start;
- Blue led indicating mains supply;
- Green led indicating motor running;
- Red led indicating motor overload;
- Soft starter with the following main controls: - Integrated By-Pass; - Phase control (R-S); - Trimmer for starting ramp (0…20 s); - Trimmer for stopping ramp (0…20 s); - Trimmer for starting voltage (40…70 %); - Fieldbus communication;
- Overload thermal relay internally restorable.
- Auxiliaries and motor protection fuses;
- Isolator;
- Metallic box, IP54;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
VERSIONS
STATIC 1
POWER SUPPLY
- Power supply 3~50/60Hz 400V ±10%;
Static
Would you like more information?
Contact us for a quote and find out the discounted price reserved for you!
KEY FEATURES
STATIC series
The entire STATIC series is offered as standard with an IP54 metal box, and a whole series of accessories and options are available, including double door boxes and fiberglass enclosures.
Soft starter start
The connection scheme typically used is the one defined as "in line". Furthermore, when the type of soft starter does not provide for a thermal protection implemented internally, the use of an external thermal relay installed upstream of the by-pass node is envisaged.
A soft starter for starting pumps mainly consists of two parts: a power unit and a command and control unit.
WHAT CAN'T MISS
VOLT
COD:
98008
Analog voltmeter 0-500v
RL-…
COD:
98006*
Level relay for automation
K3SL
COD:
98007
Kit of 3 level probes (electrodes)
COM
COD:
98009
4-position voltmeter selector switch
MODELS
STATIC 1
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
ACCESSORIES
Codice
Modello
Descrizione
EXPANSIONS
Codice
Modello
Descrizione
RELATED PRODUCTS
Codice
Modello
Descrizione
TYPICAL APPLICATIONS
_edited.webp)
Pressurization
Choose the Elentek control panels to ensure precise and reliable control of pressurization and irrigation systems. The range of integrated solutions designed meets the pressurization or irrigation systems: with pressure switch and level probes; with pressure switch and dry running without probes; with pressure switches and dry running protection with floats or with 4-sensor20th and dry running without probes.
_edited.webp)