Directo Plus
DIRECT START
The Directo Plus system represents the evolution of the traditional direct-on-line starting system, maintaining the motor's direct connection to the electrical grid for full-voltage starting (Direct On Line), while offering greater flexibility of use and configuration.
Designed for applications with submersible or submersible pumps and drainage systems requiring wider intervention thresholds, the Directo Plus allows for extensive calibration of operating parameters and integrates advanced control and signaling functions.
The compact structure with an ABS enclosure facilitates installation, while advanced alarm management and, in the dual-motor version, the alternating function with automatic standby motor start in the event of overload, guarantee continuity of service, operational reliability, and ease of use in a single solution.
Starting from €510
CUSTOMISATION
EASY INSTALLATION
VERSATILITY
MAIN FEATURES
FUNCTIONS
- Normally open input for start command;
- Normally open input for minimum level/pressure command;
- Automatic-0-Manual selector (manually stable):
- Manual: direct operation without controls;
- Automatic: operation controlled by minimum level and start inputs; - Blue LED for mains presence;
- Green LED for motor active;
- Red LED for motor overload alarm;
- AC3 line contactor;
- Internally resettable thermal overload relay;
- ABS box;
- Dual control operation:
- start command
- stop command (excludable) - 24 VAC alarm output for overload and/or maximum level indication
- Provision for insertion of the level probe interface module (RL-S)
VERSIONS
- Power supply 1 ~ 50/60Hz 230V±10% (DIRECTO-Mono);
- Power supply 3 ~ 50/60Hz 400V±10% (DIRECTO-Tri);
CONTROLS
- AC3 line contactor;
- Internally resettable thermal overload relay;
- Two AC3 line contactors and two thermal overload relays in the DIRECTO 2 PLUS version.
PROTECTIONS
- Motor overload protection via thermal relay;
- Alarm signal via 24 VAC output;
- Control inputs for minimum and maximum level or pressure monitoring;
- ABS enclosure up to 11 kW.
Directo Plus
DIRECTO PLUS 1
Ingresso normalmente aperto per comando di avviamento;
Ingresso normalmente aperto per comando di minimo livello/pressione;
Selettore Automatico-0-Manuale (stabile):
Manuale: funzionamento diretto senzacontrolli;
Automatico: funzionamento con controlloda ingressi di minima e di avviamento;
Led blu di presenza rete;
Led verde di motore attivo ;
Led rosso di allarme motore in sovraccarico;
Contattore di linea in AC3;
Relé termico di sovraccarico ripristinabile internamente;
Box in ABS
Funzionamento con doppio comando: comando di marcia; comando di arresto (escludibile)
Uscita allarme 24Vac per segnalazione sovraccarico e/o massimo livello
Predisposizione per l’inserimento del modulo di interfaccia per sonde di livello (RL-S)
DIRECTO PLUS 2
2 Ingressi normalmente aperti per comando di avviamento;
2 Ingressi normalmente aperti per comando di minimo livello/pressione;
2 Selettori Automatico-0-Manuale (stabile): - Manuale: funzionamento diretto senza controlli;
Automatico: funzionamento con controllo da ingressi di minima e di avviamento;
Led blu di presenza rete;
2 Led verdi di motore attivo;
Led rosso di allarme motore in sovraccarico;
2 Contattori di linea in AC3;
2 Relé termici di sovraccarico ripristinabili internamente;
Box in ABS
Relè di alternanza integrato di serie;
Avviamento automatico del motore in standby in caso di sovraccarico del motore in funzione
Uscita allarme 24Vac per segnalazione sovraccarico e/o massimo livello
Would you like more information?
Contact us for a quote and find out the discounted price reserved for you!
KEY FEATURES
Direct start-up
The direct start system is perhaps the simplest and most traditional and consists of connecting the engine directly to the mains supply, thus performing a full-voltage start. It is often abbreviated to DOL (Direct On Line).
The DIRECTO control panel provides a direct connection to the mains supply, which implies:
- Full voltage starting and constant frequency
- High starting torque
- Very short average acceleration times.
Components
DIRECTO control panels are manufactured in plastic or metal enclosures with a minimum protection rating of IP55.
Each switchboard has warning lights for voltage presence, thermal intervention and motor in operation, a manual or automatic selector switch, a disconnector switch with door lock system.
A terminal board allows connection to external utilities and controls such as pressure switches, floats, etc.
WHAT CAN'T MISS
SC-3P
COD:
98002
Relay for exchange on 3 motors
RL-…
COD:
98006*
Level relay for automation
K3SL
COD:
98007
Kit of 3 level probes (electrodes)
SC-2P
COD:
98001
Relay for exchange on 2 motors
MODELS
Directo Plus 1
CONNECTION DIAGRAMS
Directo Plus 2
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
ACCESSORIES
Codice
Modello
Descrizione
EXPANSIONS
Codice
Modello
Descrizione
RELATED PRODUCTS
Codice
Modello
Descrizione