Static Plus
SOFT STARTER START
A simple and intuitive display to configure and view the parameters, high performance to eliminate mechanical stress and water hammer. Static Plus is the Elentek panel that allows you to safely manage the most varied situations.
From 1969 €
CUSTOMISATION
EASY INSTALLATION
VERSATILITY
MAIN FEATURES
MAIN FEATURES
- IAuxiliaries contacts and circuits in low voltage;
- Normally open contact for start;
- Normally open contact for minimum level/pressure contact;
- Soft starter with the following advanced controls: - Backlighted LCD with keyboard; - Integrated By-Pass; - Phase control (R-S); - Nominal current of the motor; - Timer for starting ramp (1…30 s); - Timer for stopping ramp (Off, 1…30 s); - Start/Stop voltage (30…70 %); - Limit of the current; - Couple control during the starting ramp; - Couple control during the stopping ramp; - Kick start; - Electronic control for motor overload; - Protection from low load; - Protection from rotor blocked; - Fieldbus communication; - Comunicazione Fieldbus;
- Selector for Auto-Off-Manual (stable) operation; - Manual: direct operation without controls; - Automatic: operation with control by minimum level/pressure and start;
- Blue led indicating mains supply;
- Green led indicating motor running;
- Red led indicating motor overload;
- Overload thermal relay internally restorable.
- Auxiliaries and motor protection fuses;
- Isolator;
- Metallic box, IP54;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
VERSIONS
STATIC PLUS 1
POWER SUPPLY
- Power supply 3~50/60Hz 400V ±10%;
Static Plus
Would you like more information?
Contact us for a quote and find out the discounted price reserved for you!
KEY FEATURES
Soft starter start
A soft starter for starting pumps mainly consists of two parts: a power unit and a command and control unit.
The connection scheme typically used is the one defined as "in line". Furthermore, when the type of soft starter does not provide for a thermal protection implemented internally, the use of an external thermal relay installed upstream of the by-pass node is envisaged.
STATIC PLUS series
The entire STATIC PLUS series is offered as standard with an IP54 metal box, and a whole series of accessories and options are available, including double door boxes and fiberglass enclosures.
WHAT CAN'T MISS
VOLT
COD:
98008
Analog voltmeter 0-500v
RL-…
COD:
98006*
Level relay for automation
K3SL
COD:
98007
Kit of 3 level probes (electrodes)
COM
COD:
98009
4-position voltmeter selector switch
MODELS
STATIC PLUS 1
Code
1105
Model
STATIC PLUS 1/30
Voltage
3~400 V
Capacitor
Maximum power
30
Kw
Hp
40
Current
Range
18-60
Max
60
Box
H x L x W
Dimensions
600X410X240
Material
Metallic
Weight Kg.
35
Code
1106
Model
STATIC PLUS 1/37
Voltage
3~400 V
Capacitor
Maximum power
37
Kw
Hp
50
Current
Range
21.6-72
Max
72
Box
H x L x W
Dimensions
600X410X240
Material
Metallic
Weight Kg.
45
Code
1107
Model
STATIC PLUS 1/45
Voltage
3~400 V
Capacitor
Maximum power
45
Kw
Hp
60
Current
Range
25.5-85
Max
85
Box
H x L x W
Dimensions
600X410X240
Material
Metallic
Weight Kg.
45
Code
1108
Model
STATIC PLUS 1/55
Voltage
3~400 V
Capacitor
Maximum power
55
Kw
Hp
75
Current
Range
31.5-105
Max
105
Box
H x L x W
Dimensions
600X410X240
Material
Metallic
Weight Kg.
47
Code
1109
Model
STATIC PLUS 1/59
Voltage
3~400 V
Capacitor
Maximum power
59
Kw
Hp
80
Current
Range
42.6-125
Max
125
Box
H x L x W
Dimensions
800X610X380
Material
Metallic
Weight Kg.
58
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
CONNECTION DIAGRAMS
ACCESSORIES
Codice
Modello
Descrizione
98014*
CON-OV...V
Code
Model
Description
Hour meter
98015*
RLOG-….
Code
Model
Description
Relay for logic of automation
98016
RA
Code
Model
Description
General alarm relay
98017
2GMA
Code
Model
Description
Circuit for control from 2 external contacts (ON and STOP)
98018
CEV24
Code
Model
Description
Electrovalve control 24V from pressure/float switch
98019
CSF 380
Code
Model
Description
Phase failure/sequence control
98020
CMMT
Code
Model
Description
Phase failure/sequence control, min/max voltage, phase reversal
98021
PSS
Code
Model
Description
Start/stop pushbuttons
98022
FE
Code
Model
Description
Emergency pushbutton
98029
DT
Code
Model
Description
Daily timer with switch-riders
EXPANSIONS
Codice
Modello
Descrizione
RELATED PRODUCTS
Codice
Modello
Descrizione
1500
UNIT ALARM 1
Code
Model
Description
Acoustic alarm panel with buffer battery
1501
UNIT ALARM 2
Code
Model
Description
Acoustic/visual alarm panel with buffer battery
1502
UNIT ALARM GSM
Code
Model
Description
Acoustic/visual alarm panel with buffer battery and GSM kit
1503
FLASH 12
Code
Model
Description
Acoustic/visual alarm panel
98044
TP010B
Code
Model
Description
Pressure transducer 0-10Bar 4-20mA
98045
TP016B
Code
Model
Description
Pressure transducer 0-16Bar 4-20mA
99009
BASE FULL
Code
Model
Description
Base for horizontal and vertical 2-pump booster kits
99020+...
MANIFOLD
Code
Model
Description
Stainless steel manifolds
99034
FLO 10
Code
Model
Description
Float switch with neoprene cable length 10 m
99036
DROP 10
Code
Model
Description
Variable float switch with neoprene cable length 10 m
99039
SHELL
Code
Model
Description
Counterweight
_edited.webp)
_edited.webp)