


smart PRO X
Smart pro is not enough?
The practical display to check the working and operation data of the motors connected distinguishes SMART PRO X. Thanks to the new expansion modules system and the connections, the panel can be used for a wide range of applications and increases the potential of the system. Compact, very easy to install and program also by App, it facilitates the replacement of old and obsolete panels installed.
EASY INSTALLATION
USER INTERFACE
EXPANDABILITY
VERSATILITY
FUNCTIONS
LCD display to show voltage, current, working hours, number of starts, motor status and alarms
AUTOMATIC - 0 (standby) – MANUAL pushbuttons (fixed or pulse)
Language settings (Italian, English, French, Spanish, German)
Anti-seize autotest (can be disabled)
Dry running protection with: level probes/ floats/pressure switches
Up to 4 control inputs: floats/pressure switches
Clicson inputs with automatic reset (can be disabled)
Input reversal (from normally open to normally closed)
Start/stop float switch function (can be disabled)
Selectable amperometric protection delay
Automatic reset due to minimum current alarm (can be disabled)
Activation delay from mains return(can be disabled)
Manual pushbutton operation (fixed or pulse)
Provision for run capacitors, single-phase version (not included)

ADDITIONAL FUNCTIONS SMART PRO X 2
Duty/standby (can be disabled)
Immediate motor changeover in case of a fault
VERSIONS
Power supply 1phase 100-240Vac 50/60Hz
Power supply 3phase 310-450Vac 50/60Hz
CONTROLS
Electronic control of minimum and maximum voltage
Electronic control of maximum current with assisted calibration
Electronic control of minimum current (dry running) with assisted calibration
Failure or incorrect phase sequence control on power supply input (can be disabled)
ALARMS
Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
General alarm output contacts
PROTECTIONS
Auxiliary and motor protection fuses
Isolator (except for NB code)
Box in ABS, IP55

CARATTERISTICHE PRINCIPALI
smart PRO X
smart PRO X
CLAMP
EXTRACTABLE


RS485
(Optional)

EXPANDABILITY
MODULAR


CARATTERISTICHE CHIAVE

COSA NON PUÓ MANCARE
Float DROP
COD:
DROP 20
Variable buoyancy float with 20 meters of cable

UNIT ALARM 2
COD:
UNIT ALARM 2
UNIT ALARM 2 is a device applicable to any system where it is necessary to have audible and visual flashing alarm signals, even in the absence of mains power.

APP
COD:
APP
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.

Float FLO
COD:
FLO 20
Float with 20m neoprene cable


MODELLI E SCHEMI DI COLLEGAMENTO
Smart Pro X 1



