top of page
sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Elentek Pluvio PRO Control Panel for Pumps

pluvio PRO

Do you want to start the emptying pump at the right time?

PLUVIO guarantees the emptying of the rainwater first flush tank. This is the electronic panel by Elentek specific for this type of system. At the end of the meteorological event, the rain sensor connected to the panel will start the emptying pump at the end of the preset time.

Compact, economical, very easy to install and program, PLUVIO facilitates the replacement of old panels installed.

From 719 €

EASY INSTALLATION

average rating is 4 out of 5

USER INTERFACE

average rating is 4 out of 5

EXPANDABILITY

average rating is 4 out of 5

VERSATILITY

average rating is 3 out of 5

FUNCTIONS

  • LEDs on front of panel for signalling operating status and alarms

  • AUTOMATIC - 0 (standby) - MANUAL selector (fixed or pulse)

  • PLUVIO PRO 2 motor alternation (can be disabled)

  • Immediate engine exchange in case of PLUVIO PRO 2 anomaly

  • Dry running protection with: level probes/ float switche

  • Up to 4 control inputs: floats/pressure switches

  • Clicson thermal pad inputs with automatic reset (can be disabled)

  • Current protection delay

  • Automatic reset due to minimum current alarm (can be disabled)

  • Activation delay from mains return (can be disabled)

  • Manual button operation (fixed or momentary)

  • Provision for run capacitors for single-phase version (not included)

  • Delay timer for pump start at the end of the rain event (settable)

  • Rain sensor

ADDITIONAL FUNCTIONS PLUVIO PRO 2

  • Duty standby (excludable)

  • Immediate motor changeover in case of a fault

pluvio PRO

VERSIONS

  • Power supply 1phase 100-240Vac 50/60Hz

  • Power supply 3phase 310-450Vac 50/60Hz

CONTROLS

  • Electronic control of maximum current

  • Electronic control of minimum current (dry running)

  • Failure or incorrect phase sequence control on power supply input (can be disabled)

ALARMS

  • Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor

  • General alarm output contacts

PROTECTIONS

  • Auxiliary and motor protection fuses

  • Isolator (except for NB code)

  • Box in ABS, IP55

MAIN FEATURES

pluvio PRO

pluvio PRO

BLUETOOTH WI-FI MODULE FOR APP

BMS FREE VOLTAGE CONTACTS MODULE

RS485 MODBUS MODULE

PRESSURISATION

FILLING

EMPTYING

DRAINAGE

Elentek Pluvio PRO Control Panel for Pumps

CONNECTIVITY

APPLICATIONS

RS485
(Optional)

RAIN SENSOR

RAIN SENSOR
EXPANDABILITY
MODULAR
RS485
(Optional)

EXPANDABILITY
MODULAR

Image by Adi Goldstein
Select an option

PRIVACY

I declare to be at least sixteen, and if less than sixteen, to have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

COMMUNICATIONS
I consent to the processing of my personal data for receiving newsletters, communications via telephone (SMS, WhatsApp, voice call). Informative contact form and information request.

Would you like more information?
  Contact us for a quote and find out the  discounted price reserved for you!  

KEY FEATURES

WHAT CAN'T MISS

DROP float for dirty water

Float DROP

COD:

99037

Variable buoyancy float with 20 meters of cable

App to control the control panel

APP

COD:

98107

The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.

Column for external panel protection

E-KIOSK

COD:

97007

Polyethylene column for protection of Elentek switchboards

FLO float for clear water

Float FLO

COD:

99035

Float with 20m neoprene cable

MODELS 

Load more model

Pluvio PRO 1

Load more model

CONNECTION DIAGRAMS