SOFT STARTER START
The control panel with soft starter with trimmer adjustment, easy to use and adjust.
Simple and intuitive adjustments allow maximum control, while the gradual starting of the engine reduces mechanical and hydraulic stress.
From 1217 €
Auxiliaries contacts and circuits in low voltage;
Normally open contact for start;
Normally open contact for minimum level/pressure contact;
Selector for Auto-Off-Manual (stable) operation;
- Manual: direct operation without controls;
- Automatic: operation with control by minimum level/pressure and start;
Blue led indicating mains supply;
Green led indicating motor running;
Red led indicating motor overload;
Soft starter with the following main controls:
- Integrated By-Pass;
- Phase control (R-S);
- Trimmer for starting ramp (0…20 s);
- Trimmer for stopping ramp (0…20 s);
- Trimmer for starting voltage (40…70 %);
- Fieldbus communication;
Overload thermal relay internally restorable.
Auxiliaries and motor protection fuses;
Metallic box, IP54;
Ambient temperature: -5/+40 °C;
Relative humidity 50% at 40 °C (not condensed).
Power supply 3~50/60Hz 400V ±10%;
The entire STATIC series is offered as standard with an IP54 metal box, and a whole series of accessories and options are available, including double door boxes and fiberglass enclosures.
Soft starter start
A soft starter for starting pumps mainly consists of two parts: a power unit and a command and control unit.
The connection scheme typically used is the one defined as "in line".
Furthermore, when the type of soft starter does not provide for a thermal protection implemented internally, the use of an external thermal relay installed upstream of the by-pass node is envisaged.
COSA NON PUÓ MANCARE
Analog voltmeter 0-500V
Level relay for automation
Kit of 3 level probes (electrodes)
4-position voltmeter selector switch
SCHEMI DI COLLEGAMENTO