pluvio PRO
Do you want to start the emptying pump at the right time?
PLUVIO guarantees the emptying of the rainwater first flush tank. This is the electronic panel by Elentek specific for this type of system. At the end of the meteorological event, the rain sensor connected to the panel will start the emptying pump at the end of the preset time.
Compact, economical, very easy to install and program, PLUVIO facilitates the replacement of old panels installed.
From 719 €
EASY INSTALLATION
USER INTERFACE
EXPANDABILITY
VERSATILITY
FUNCTIONS
LEDs on front of panel for signalling operating status and alarms
AUTOMATIC - 0 (standby) - MANUAL selector (fixed or pulse)
PLUVIO PRO 2 motor alternation (can be disabled)
Immediate engine exchange in case of PLUVIO PRO 2 anomaly
Dry running protection with: level probes/ float switche
Up to 4 control inputs: floats/pressure switches
Clicson thermal pad inputs with automatic reset (can be disabled)
Current protection delay
Automatic reset due to minimum current alarm (can be disabled)
Activation delay from mains return (can be disabled)
Manual button operation (fixed or momentary)
Provision for run capacitors for single-phase version (not included)
Delay timer for pump start at the end of the rain event (settable)
Rain sensor
ADDITIONAL FUNCTIONS PLUVIO PRO 2
Duty standby (excludable)
Immediate motor changeover in case of a fault
VERSIONS
Power supply 1phase 100-240Vac 50/60Hz
Power supply 3phase 310-450Vac 50/60Hz
CONTROLS
Electronic control of maximum current
Electronic control of minimum current (dry running)
Failure or incorrect phase sequence control on power supply input (can be disabled)
ALARMS
Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
General alarm output contacts
PROTECTIONS
Auxiliary and motor protection fuses
Isolator (except for NB code)
Box in ABS, IP55
CARACTÉRISTIQUES PRINCIPALES
pluvio PRO
pluvio PRO
RS485
(Optional)
RAIN SENSOR
EXPANDABILITY
MODULAR
PRINCIPALES CARACTÉRISTIQUES
À NE PAS MANQUER
APP
COD:
98107
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.
MODÈLES
Pluvio PRO 1
SCHÉMAS DE RACCORDEMENT
Pluvio PRO 2
SCHÉMAS DE RACCORDEMENT
SCHÉMAS DE RACCORDEMENT
SCHÉMAS DE RACCORDEMENT
ACCESSOIRES
Code
Modèle
Description
EXTENSIONS
Code
Modèle
Description
PRODUITS CONNEXES
Code
Modèle
Description
_edited.jpg)