top of page
sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Elentek Wastek PRO Control Panel for Pumps

wastek PRO

A control panel for a small well?

Wastek Pro is designed to fit into small spaces. The peculiarity of this control panel is the possibility to use an air pressure sensor, particularly useful when the installation site is a small well.

Wastek Pro allows an accurate level detection from 0 to 100 cm and is expandable with a range of connectivity modules.

From 469 €

EASY INSTALLATION

la calificación promedio es 3 de 5

USER INTERFACE

la calificación promedio es 5 de 5

EXPANDABILITY

la calificación promedio es 3 de 5

VERSATILITY

la calificación promedio es 3 de 5

FUNCTIONS

  • LCD display for displaying and programming: voltage, current, power factor, hours of operation, number of starts, motor status, alarms, sensor signal and thresholds

  • AUTOMATIC - 0 (standby) – MANUAL pushbuttons (fixed or pulse)

  • Language settings (Italian, English, French, Spanish, German)

  • Dry running protection by: level probes/floats/pressure switches and minimum current

  • Up to 4 control inputs: floats/pressure switches

  • Input for air sensor and 4-20 mA or 0-10V analogue signal

  • Unit of measurement of analog signal: centimetres or metres

  • Clicson inputs with automatic reset (can be disabled)

  • Inputs inversion (from normally open to normally closed)

  • Automatic reset from minimum current alarm settable with 4 programmable times

  • Start-up and shutdown delay time (programmable)

  • Maintenance time control (programmable

  • Pushbutton for manual operation (fixed or pulse)

  • Provision for run capacitors on single-phase model (not included)

ADDITIONAL FUNCTIONS WASTEK PRO 2

  • Duty/standby (can be disabled)

  • Immediate motor changeover in case of a fault

wastek PRO

VERSIONS

  • Power supply 1phase 100-240Vac 50/60Hz

  • Power supply 3phase 310-450Vac 50/60Hz

CONTROLS

  • Electronic control of minimum and maximum voltage

  • Electronic control of maximum motor current

  • Electronic minimum motor current control

  • Failure or incorrect phase sequence control on power supply input (can be disabled)

ALARMS

  • Alarms reported: voltage status, levels, motor overload, minimum current, clicson motor

  • System maintenance warning

  • Alarm output contacts

PROTECTIONS

  • Auxiliary and motor protection fuses

  • Isolator (except for NB code)

  • Box in ABS, IP55

CARACTERISTICAS PRINCIPALES

wastek PRO

wastek PRO

BLUETOOTH WI-FI MODULE FOR APP

BMS FREE VOLTAGE CONTACTS MODULE

RS485 MODBUS MODULE

PRESSURISATION

FILLING

EMPTYING

DRAINAGE

Elentek Wastek PRO Control Panel for Pumps

CONECTIVIDAD

APPLICACIONES

RS485
(Optional)

UNIQUE APP

UNIQUE APP
AIR PRESSURE SENSOR
RS485
(Optional)

AIR PRESSURE SENSOR

Image by Adi Goldstein
Seleccione una opción

PRIVACY

Declaro que soy mayor de dieciséis años, y si soy menor de dieciséis, que he sido autorizado por el titular de la patria potestad, por lo que consiento el tratamiento de mis datos personales tal y como se indica en la Privacy Policy.

COMUNICACION

Autorizo el tratamiento de mis datos personales. Para el envío del boletín de noticias, comunicación por teléfono (sms, WhatsApp, llamada de voz). Formulario de contacto y solicitud de información.

¿Quieres más info? 

  ¡Contáctenos para una cotización y descubra el precio con descuento reservado para usted!  

CARACTERISTICAS CLAVE

LO QUE NO PUEDE FALTAR

DROP float for dirty water

Float DROP

COD:

99037

Variable buoyancy float with 20 meters of cable

Acoustic, visual, GSM alarm device

UNIT ALARM 2

COD:

01501

UNIT ALARM 2 is a device applicable to any system where it is necessary to have audible and visual flashing alarm signals, even in the absence of mains power.

App to control the control panel

APP

COD:

98107

The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.

FLO float for clear water

Float FLO

COD:

99035

Float with 20m neoprene cable

MODELOS

Cargar otros modelos

Wastek PRO 1

Cargar otros modelos

DIAGRAMAS DE CONEXION