Quadro con inverter Vartek Plus Elentek

Vartek Plus

Electric panel with frequency inverter from 1 to 3 three-phase pumps with electronic overload control

 

The smart solution for pump performance control.

VARTEK PLUS is the Elentek electrical panel with frequency inverter from 1 to 3 three-phase pumps.

 

General technical features

  • Power supply 3~50/60 Hz 400V ±10% - output 3~400V;

  • Auxiliaries contacts and circuits in low voltage;

  • Normally open contact for start with selector in “Manual”
    position;

  • Normally open contact for minimum level/pressure contact;

  • Selector for Auto-Off-Manual operation (MANUAL stable):

    • Manual: costant operation at 50Hz with input from pressure switch;

    • Automatic: operation in modulation with analog sensor;

  • Analog input 4-20mA (0-10V on request);

  • Electronic frequency inverter with:

    • multifunction LCD

    • internal ventilation

    • “pid” regulation

    • connection for RS232/485

    • 1st and 2nd ambient EMC filter

    • max distance of the motor up to 5.5 KW: 100 meters

    • max distance of the motor up to 37 KW: 200 meters

    • max distance of the motor up to 220 KW: 300 meters

  • Auxiliaries and motor protection fuses;

  • Isolator;

  • Forced ventilation kit;

  • Metallic box, IP54;

  • Ambient temperature: -5/+40 °C;

  • Relative humidity 50% at 40 °C (not condensed).

Download

 

PRIVACY

I declare that I am sixteen years old, and if I am under sixteen, that I have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy .

COMMUNICATIONS

I agree to the treatment of my personal data. For the forwarding of the newsletter, communications via telephone (sms, WhatsApp, voice call)

More  info?

You can ask for information or a quote to find out the discounted price dedicated to you.

Highlights

 
inverter 2 (Grande).jpg

Variable speed driver

A frequency converter is an electronic device used to control the rotational speed and torque of an electric motor. The motor, in turn, drives a load (such as a pump). A frequency converter converts the alternating current voltage of the network into direct current via a rectifier and is stabilized by the intermediate circuit capacitor bank. Finally, the inverter converts the voltage from direct current to alternating current with variable frequency again. Frequency converters for primary water and waste water treatment applications are equipped with several customized functions for controlling single and multipump systems.

Money growing plant step with deposit co

Advantages

These specific functions for pumps help to reduce operating and maintenance costs over the entire lifecycle of the pumping system.

Frequency converters achieve these results by:

  • Reduction of starting stress for the pumping system

  • Optimal speed based on the demand of the moment

  • Optimization of energy consumption in parallel pump systems (booster)

  • Prevention of cavitation and dry running of the pumps

  • Monitoring of energy consumption

  • Pump motor monitoring and protection

  • Energy savings expressed in kWh, in economic terms or in CO2 emissions

W7054805-03.jpg

Components and applications

VARTEK PLUS electrical panels come with a multifunction display, a manual or automatic selector, a switch disconnector with door lock system.

A terminal block allows the connection to the utilities and external commands such as pressure switches, floats etc.
VARTEK PLUS electrical panels are optimal in various applications with:

  • Industrial water pumps, booster pumps

  • Rainwater lifting pumps, irrigation pumps (submerged or surface)

  • Submersible pumps, wastewater pumps

 

 

Models

Comparison table

Quadri adatti

Vartek Plus 1

Control panels for 1 pump / motor with frequency inverter

Quadri adatti

Vartek Plus 2

Control panels for 2 pumps / motors with frequency inverter

Quadri adatti

Vartek Plus 3

Control panels for 3 pumps / motors with frequency inverter

Quadri adatti

Accessories

 
  • By-pass guasto inverter

  • Inverter pump rotation

  • Potenziometro regolazione frequenza inverter 0-50 Hz

  • Sensore di pressione elettronico 0-25Bar

  • Sensore di pressione elettronico 0-16Bar

  • Sensore di pressione elettronico 0-10Bar

  • Comando esterno per attivazione/spegnimento utenza

  • Timer pausa/lavoro

  • Timer settimanale digitale

  • Timer giornaliero

  • Timer multifunzione

  • Pulsante start/stop

  • Level relay for automation

Discover our products

Find out how we do it

Support

30 Motivated people

The strength of our company is our staff. 30 highly qualified and motivated people who manage even the most difficult challenges by working together, because together nothing is impossible.

About Us:

Address

Via A. Meucci, 5-11, 35028

Piove di Sacco (PD) - Italia

Working      Hours 

Monday          08-12 / 13.30-17.30

Tuesday         08-12 / 13.30-17.30

Wednesday    08-12 / 13.30-17.30

Thursday        08-12 / 13.30-17.30

Friday              08-12 / 13.30-17.30

Saturday        closed

Sunday           closed

Contacts

Copyright 2019 - Elentek srl

VAT no. 04534630282

Cap. Soc. i.v. 100.000€

More info?

We will reply as soon as possible!

PRIVACY

I declare to be at least sixteen, and if less than sixteen to have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

COMMUNICATION

I consent to the processing of my personal data. For the transmission of newsletters, communication via telephone (SMS, WhatsApp, voice call)

MON - FRI 8.00-12.00 and 13.30-17.30