top of page
sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Static plus - Soft starter electromechanical control panel

Static Plus

SOFT STARTER START

A simple and intuitive display to configure and view the parameters, high performance to eliminate mechanical stress and water hammer. Static Plus is the Elentek panel that allows you to safely manage the most varied situations.

From 1969 €

EASY INSTALLATION

la valutazione media è 4 su 5

CUSTOMISATION

la valutazione media è 5 su 5

VERSATILITY

la valutazione media è 4 su 5

MAIN FEATURES


  • IAuxiliaries contacts and circuits in low voltage;

  • Normally open contact for start;

  • Normally open contact for minimum level/pressure contact;

  • Soft starter with the following advanced controls:
    - Backlighted LCD with keyboard;
    - Integrated By-Pass;
    - Phase control (R-S);
    - Nominal current of the motor;
    - Timer for starting ramp (1…30 s);
    - Timer for stopping ramp (Off, 1…30 s);
    - Start/Stop voltage (30…70 %);
    - Limit of the current;
    - Couple control during the starting ramp;
    - Couple control during the stopping ramp;
    - Kick start;
    - Electronic control for motor overload;
    - Protection from low load;
    - Protection from rotor blocked;
    - Fieldbus communication;
    - Comunicazione Fieldbus;

  • Selector for Auto-Off-Manual (stable) operation;
    - Manual: direct operation without controls;
    - Automatic: operation with control by minimum level/pressure and start;

  • Blue led indicating mains supply;

  • Green led indicating motor running;

  • Red led indicating motor overload;

  • Overload thermal relay internally restorable.

  • Auxiliaries and motor protection fuses;

  • Isolator;

  • Metallic box, IP54;

  • Ambient temperature: -5/+40 °C;

  • Relative humidity 50% at 40 °C (not condensed).

Static Plus

VERSIONS

  • STATIC PLUS 1

POWER SUPPLY

  • Power supply 3~50/60Hz 400V ±10%;

CARATTERISTICHE PRINCIPALI

Static Plus

Static Plus

Static plus - Soft starter electromechanical control panel

CONNETTIVITÀ

APPLICAZIONI

DOWNLOAD

Image by Adi Goldstein
Seleziona un'opzione

PRIVACY

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

COMUNICAZIONI

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale). Informativa modulo contatti e richiesta informazioni.

Vuoi maggiori informazioni? 
  Contattaci per un preventivo e scopri il  prezzo scontato a te riservato!  

CARATTERISTICHE CHIAVE

Soft starter start

A soft starter for starting pumps mainly consists of two parts: a power unit and a command and control unit.
The connection scheme typically used is the one defined as "in line".
Furthermore, when the type of soft starter does not provide for a thermal protection implemented internally, the use of an external thermal relay installed upstream of the by-pass node is envisaged.

How does a Soft Starter works

STATIC PLUS series

The entire STATIC PLUS series is offered as standard with an IP54 metal box, and a whole series of accessories and options are available, including double door boxes and fiberglass enclosures.

Discover the extras of the Static Plus

COSA NON PUÓ MANCARE

Analog voltmeter 0-500v

VOLT

COD:

98008

Analog voltmeter 0-500v

Level relay for automation

RL-…

COD:

98006*

Level relay for automation

Kit of 3 level probes (electrodes)

K3SL

COD:

98007

Kit of 3 level probes (electrodes)

Voltmeter for control panels

COM

COD:

98009

4-position voltmeter selector switch

MODELLI 

Carica altri modelli

STATIC PLUS 1

Carica altri modelli

SCHEMI DI COLLEGAMENTO