


FLASH
Acoustic/visual alarm panel
Acoustic and visual electrical alarm device to be combined with our control panels: simple, compact and inexpensive.
TECHNICAL FEATURES
- Power supply: 12Vdc/ac
- Flashing light: red
- Alarm sound: 90 dB
- 1 normally open input for alarm command from dry contacts
- 1 Normally closed input for alarm command from dry contacts
- Box material: ABS, IP54


CARATTERISTICHE PRINCIPALI
FLASH
FLASH
FLASHING ALARM


ACOUSTIC ALARM

SMALL AND COMPACT


CARATTERISTICHE CHIAVE
Fonctionnement général
Flash est un avertisseur sonore avec sirène 90db et visuel avec un clignotant rouge, simple, compact et économique à utiliser dans les installations en combinaison avec les armoires électriques Elentek et au-delà.
Disponible dans la version pour alimentation avec tension:
12VDC/AC (combinable par exemple avec les tableaux électroniques série SMART EVO, EXPRESS, etc.)
24VDC/AC (combinable par exemple aux panneaux électromécaniques)
220VAC (pour les applications générales).
L’alarme est déclenchée par un contact propre (normalement ouvert).

General operation
The UNIT ALARM panel is a device applicable to any system where it is necessary to have alarm signals even in case of black-out or lack of mains power supply.
When 230V mains power is supplied the battery inside UNIT ALARM panel is automatically charged according to the charge level of the battery itself.
It is recommended to periodically carry out a test to check the correct operation of the panel by holding the TEST button down to temporarily activate the acoustic signal and, if present, the flashing light.
When the NC and NO inputs change their status (NC opens and NO closes) the acoustic and, if present, flashing alarm is activated (red flashing).


COSA NON PUÓ MANCARE
