


express PRO
The expression of completeness?
In this new version, EXPRESS PRO is once again the most complete, versatile and practical panel in the Elentek range. With its simple and immediate user interface, 6 preset modes of use and multiple applications, Express Pro has evolved even further with additional connectivity, control and expandability options.
EASY INSTALLATION
USER INTERFACE
EXPANDABILITY
VERSATILITY
FUNCTIONS
LCD display for displaying and programming: voltage, current, power factor, hours of operation, number of starts, motor status, alarms, analogue signal and thresholds
AUTOMATIC - 0 (standby) - MANUAL (fixed or pulse) operation buttons
Language settings (Italian, English, French, Spanish, German)
Anti-seize autotest (programmable)
Dry running protection with: level probes/ floats/ pressure switches and minimum current
Up to 6 control inputs: floats/pressure switches
Input for 4-20 mA or 0-10V analogue signal
Unit of measurement analogue signal cm - m - bar
Emergency start and stop inputs with analogue signal operation mode (can be disabled)
Clickson thermal pad inputs with automatic reset (can be disabled)
Inversion of inputs (from normally open to normally closed)
Automatic reset for minimum current alarm with 4 programmable times
Activation delay from mains return (can be disabled)
Manual button operation (fixed or pulse)
Predisposition for run capacitors

EXPRESS PRO 2-3-4 ADDITIONAL FUNCTIONS
Duty standby (can be disabled)
Immediate motor changeover in the case of a fault
VERSIONS
Single-phase version 100-240Vac 50/60Hz
Three-phase version 310-450Vac 50/60Hz
CONTROLS
Electronic control of minimum and maximum voltage
Electronic control of maximum motor current
Electronic control of minimum motor current
Failure or incorrect phase sequence control on power supply input (can be disabled)
ALARMS
Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
Alarms history
Alarms for too many starts/hour (programmable)
General alarm output contacts
PROTECTIONS
Auxiliary and motor protection fuses
Isolator (except for NB code)
Duty standby (can be disabled)
Box in ABS, IP55

CARATTERISTICHE PRINCIPALI
express PRO
express PRO
ALARM HISTORY


RS485
(Optional)

EXPANDABILITY
MODULAR


CARATTERISTICHE CHIAVE

COSA NON PUÓ MANCARE
Float DROP
COD:
DROP 20
Variable buoyancy float with 20 meters of cable

UNIT ALARM 2
COD:
UNIT ALARM 2
UNIT ALARM 2 is a device applicable to any system where it is necessary to have audible and visual flashing alarm signals, even in the absence of mains power.

APP
COD:
APP
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.

Float FLO
COD:
FLO 20
Float with 20m neoprene cable


MODELLI E SCHEMI DI COLLEGAMENTO
Express PRO 1



