Dry running protection without probes?
DRYTEK PRO protects the electric pump against dry running by the power factor control integrated in the microprocessor.
Thanks to the display and the available expansions it helps saving installation time and reducing service costs.
From 279 €
LCD display showing: voltage, current, power factor, hours of operation, number of starts, motor status and alarms
AUTOMATIC - 0 (standby) – MANUAL selector (fixed or pulse)
Language settings (Italian, English, French, Spanish, German)
Anti-seize autotest (programmable)
Dry running protection by power factor control
Up to 4 control inputs: level probes/floats/pressure switches
Clicson inputs with automatic reset (can be disabled)
Inputs inversion (from normally open to normally closed)
Automatic reset for minimum power factor alarm settable with 4 times
Manual button operation (fixed or pulse)
Provision for run capacitors on single-phase model (not included)
DRYTEK PRO 2 ADDITIONAL FUNCTIONS
Duty standby (can be disabled)
Immediate motor changeover in case of fault
Power supply 1phase 100-240Vac 50/60Hz
Power supply 3phase 310-450Vac 50/60Hz
Electronic control of minimum and maximum voltage
Electronic control of maximum motor current
Dry running control by power factor
Failure or incorrect phase sequence control on power supply input (can be disabled)
Alarms reported: voltage status, levels, motor overload, minimum power factor, motor clicson
Alarm output contacts
Auxiliary and motor protection fuses
Isolator (except for NB code)
Box in ABS, IP55
COSA NON PUÓ MANCARE
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.
Drytek Pro 1
SCHEMI DI COLLEGAMENTO