top of page
sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Control panel directo

Directo

DIRECT START

The direct start system is perhaps the simplest and most traditional and consists of connecting the engine directly to the mains supply, thus performing a full-voltage start.

It is often abbreviated to DOL (Direct On Line).

Direct starting is the simplest and most economical way to start electric pumps or motors and is the one traditionally used most.

The current induced in the rotor is high. This results in a peak current on the mains which can be 5 to 8 times the nominal current.

They are suitable for starting small submersible pumps or submersible pumps or for pressure boosting systems with

surface pumps.

The switchgear provides a direct connection to the mains, which implies:

- Starting at full voltage and constant frequency

- High starting torque

- Very short average acceleration times.

EASY INSTALLATION

la valutazione media è 4 su 5

CUSTIMISATION

la valutazione media è 5 su 5

VERSATILITY

la valutazione media è 5 su 5

FUNCTIONS

  • Automatic-0-Manual selector (stable):

  • Manual: direct operation without controls;

  • Automatic: operation with control from minimum and start inputs;

  • Blue mains presence LED;

  • Green LED for active motor ;

  • Red LED for motor overload alarm;

funzioni-speciali.png

VERSIONS

  • Power supply 1 ~ 50/60Hz 230V±10% (DIRECTO-Mono);

  • Power supply 3 ~ 50/60Hz 400V±10% (DIRECTO-Tri);

CONTROLS

  • Internally resettable thermal overload relay;

  • Line contactor in AC3;

PROTECTIONS

  • 24 Vac transformer for auxiliary circuit;

  • Low voltage inputs and control circuits;

  • Auxiliary and motor protection with fuses;

  • General door lock disconnect switch;

CARATTERISTICHE PRINCIPALI

Directo

Model Directo 1 electromechanical pump panel
DIRECTO 1
  • Normally open input for start command;

  • Normally open input for minimum level/pressure command;

  • Automatic-0-Manual (stable) selector:

  • Manual: direct operation without controls;

  • Automatic: operation with control from minimum and start inputs;

  • Blue mains presence led;

  • Green LED for active motor ;

  • Red LED for motor overload alarm;

  • Line contactor in AC3;

  • Internally resettable thermal overload relay;

  • ABS box up to 11 kW, 15 kW metal box, IP55.

Model Directo 2 electromechanical pump panel
DIRECTO 2
  • 2 Normally open inputs for start command;

  • 2 Normally open inputs for minimum level/pressure control;

  • 2 Automatic-0-Manual (stable) selectors: - Manual: direct operation without controls;

  • Automatic: operation with control from minimum and start inputs;

  • Blue mains presence LED;

  • 2 Green LEDs for active motor;

  • Red LED for motor overload alarm;

  • 2 Line contactors in AC3;

  • 2 internally resettable thermal overload relays;

  • ABS box up to 11 kW, metal box up to 15 kW, IP55.

Model Directo 3 electromechanical pump panel
DIRECTO 3
  • 3 Normally open inputs for start command;

  • 3 Normally open inputs for minimum level/pressure control;

  • 3 Automatic-0-Manual (stable) selectors: - Manual: direct operation without controls;

  • Automatic: operation with control from minimum and start inputs;

  • Blue mains presence LEDs;

  • 3 Green LEDs for active motor;

  • Red LED for motor overload alarm;

  • 3 Line contactors a in AC3;

  • 3 internally resettable thermal overload relays;

  • Metal casing, IP55.

Directo

Control panel directo

CONNETTIVITÀ

APPLICAZIONI


DOWNLOAD

Image by Adi Goldstein
Seleziona un'opzione

PRIVACY

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

COMUNICAZIONI

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale). Informativa modulo contatti e richiesta informazioni.

Vuoi maggiori informazioni? 

  Contattaci per un preventivo e scopri il  prezzo scontato a te riservato!  

CARATTERISTICHE CHIAVE

Components

DIRECTO control panels are manufactured in plastic or metal enclosures with a minimum protection rating of IP55.

Each switchboard has warning lights for voltage presence, thermal intervention and motor in operation, a manual or automatic selector switch, a disconnector switch with door lock system.

A terminal board allows connection to external utilities and controls such as pressure switches, floats, etc.

Electronic board and components

Applications

Direct starting is the simplest and most economical way to start electric pumps or motors, and is traditionally the most widely used. The current induced in the rotor is high. This results in a peak current on the mains which can be 5 to 8 times the rated current. They are suitable for starting small submersible pumps or for pressure boosting systems with surface pumps.

Function indications

Direct start-up

The direct start system is perhaps the simplest and most traditional and consists of connecting the engine directly to the mains supply, thus performing a full-voltage start. It is often abbreviated to DOL (Direct On Line).

The DIRECTO switchgear provides a direct connection to the mains supply, which implies:

- Full voltage starting and constant frequency 

- High starting torque 

- Very short average acceleration times.

COSA NON PUÓ MANCARE

Level relay for emptying

COD:

RL-S

Level relay for emptying

Float DROP

COD:

DROP 20

Variable buoyancy float with 20 meters of cable

Relay for exchange on 2 motors

COD:

SC-2P

Relay for exchange on 2 motors

Float FLO

COD:

FLO 20

Float with 20m neoprene cable

MODELLI E SCHEMI DI COLLEGAMENTO

Directo 1
Carica altri modelli
Directo 2
Carica altri modelli
Directo 3
Carica altri modelli