Float switch DROP
Float switch with three watertight chambers level regulator with freely suspended trim variation.
The DROP float switch, thanks to its particular construction with integrated counterweight, remains underwater.
Used together with another of the same type, it allows you to adjust the maximum and minimum level.
It is also possible to use a third and fourth regulator respectively for the minimum and maximum alarm.
Suitable for level control in drainage systems, pumping stations and wastewater systems.
✔
FILLING
✔
EMPTYNG
TECHNICAL FEATURES
-
Float switch
-
Cable type: 05VV-F 3x1 mm²
-
Operating voltage: 230V/50 Hz
-
Nominal voltage: 250 V
-
Switching current (Max): 10(8) A
-
Cable connection with terminals without connectors
-
Temperature (Min): 0 °C
-
Temperature (Max): 50 °C
-
Degree of protection: IP68
-
Contact type: 1 changeover
-
Material: plastic
-
Cable: neoprene, IMQ certified
-
First watertight chamber
-
Second watertight chamber
-
Third watertight chamber
-
Spherical plastic seal: it augments the structural resistance of the float and weighs on the expanded polystyrene crown cap beneath creating the third watertight chamber
-
Final thermoplastic sealing: it fuses the various plastic parts together into one single piece
-
Expanded polystyrene crown cap: it compresses the metallic grit
-
Metallic grit
-
Cable gland
-
Rubber grommet: tested at 5 bar
Float switch suitable for water pumps and professional plumbing systems automation
FLO Float switch with filling / emptying function, suitable for adjusting the level of liquids.
Equipped with a 20 (8)a microswitch, it has a double seal with gasket.
Recommended to use together with a counterweight, the float is available in the version with 10m or 20m cable.
✔
FILLING
✔
EMPTYNG
TECHNICAL FEATURES
-
Float switch
-
Functions: Filling/emptying
-
Operating voltage: 230V/50 H
-
Rated voltage: 250 V
-
Switching current (Max): 10(8) A
-
Cable connection with terminals without connectors
-
Temperature (Min): 0 °C
-
Temperature (Max): 50 °C
-
Degree of protection: IP68
-
Contact type: 1 changeover
-
Material: plastic
-
Cable: neoprene, IMQ certified
Material: Polipropene
Weight: 230g
Allows the float switch to always operate with the same cable length, even in turbulent water, preventing damage to the cable.
