top of page
sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png

smart PRO X

Smart pro is not enough?

The practical display to check the working and operation data of the motors connected distinguishes SMART PRO X. Thanks to the new expansion modules system and the connections, the panel can be used for a wide range of applications and increases the potential of the system. Compact, very easy to install and program also by App, it facilitates the replacement of old and obsolete panels installed.

From 271 €

EASY INSTALLATION

average rating is 4 out of 5

USER INTERFACE

average rating is 5 out of 5

EXPANDABILITY

average rating is 5 out of 5

VERSATILITY

average rating is 4 out of 5

MAIN FEATURES

  • Display LCD per visualizzazioni: tensione, corrente, ore di lavoro, n° avviamenti, stato motori e allarmi

  • Pulsanti funzionamento AUTOMATICO- 0 (standby) – MANUALE (fisso o a impulso)

  • Impostazioni lingua (italiano, inglese, francese, spagnolo, tedesco)

  • Autoprova antigrippaggio (escludibile)

  • Protezione marcia a secco con: sonde di livello/ galleggianti/pressostati

  • Fino a 4 ingressi comando: galleggianti/ pressostati

  • Ingressi pastiglie termiche clicson con reset automatico (escludibile)

  • Inversione ingressi (da normalmente aperti a normalmente chiusi)

  • Autoritenuta per galleggianti marcia/arresto (escludibile)

  • Ritardo protezione amperometrica selezionabile

  • Ripristino automatico per allarme minima corrente (escludibile)

  • Ritardo attivazione da rientro rete (escludibile)

  • Funzionamento pulsante manuale ( fisso o momentaneo)

  • Predisposizione per condensatori di marcia per versione monofase (non inclusi)

ADDITIONAL FUNCTIONS SMART PRO X 2

  • Duty/standby (can be disabled)
  • Immediate motor changeover in case of a fault
smart PRO X

VERSIONS

  • Power supply 1 phase 100-240Vac 50/60Hz (EASY-Mono)
  • Power supply 3 phase 310-450Vac 50/60Hz (EASY-Tri/5.5)

CONTROLS

  • Electronic control of minimum and maximum voltage
  • Electronic control of maximum current with assisted calibration
  • Electronic control of minimum current (dry running) with assisted calibration
  • Failure or incorrect phase sequence control on power supply input (can be disabled)

ALARMS

  • Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
  • General alarm output contacts

PROTECTIONS

  • Auxiliary and motor protection fuses
  • Isolator (except for NB code)
  • Box in ABS, IP55

MAIN FEATURES

smart PRO X

smart PRO X

WATER IN OIL CHAMBER MODULE

BLUETOOTH WI-FI MODULE FOR APP

BUFFER BATTERY MODULE

BMS dry contacts module

LEVEL PROBES MODULE

RS485 MODBUS MODULE

✔

PRESSURISATION

✔

FILLING

✔

EMPTYING

✔

DRAINAGE

Elentek Smart PRO X Control Panel for Pumps

CONNECTIVITY

APPLICATIONS

RS485
(Optional)

CLAMP
EXTRACTABLE

CLAMP
EXTRACTABLE
EXPANDABILITY 
MODULAR
RS485
(Optional)

EXPANDABILITY
MODULAR

Image by Adi Goldstein

KEY FEATURES

WHAT CAN'T MISS

App to control the control panel

APP

COD:

98107

The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.

Float switch FLO for clear water

Galleggiante FLO

COD:

99035

FLO is a Float switch with filling / emptying function, suitable for adjusting the level of liquids.

Acoustic, visual, GSM alarm device

UNIT ALARM 2

COD:

1501

UNIT ALARM 2 is a device applicable to any system where it is necessary to have audible and visual flashing alarm signals, even in the absence of mains power.

DROP float for dirty water

Float switch DROP

COD:

99037

Variable buoyancy float with 20 meters of cable

MODELS 

Load more model

Smart PRO X 1

Load more model

CONNECTION DIAGRAMS