pluvio PRO
Do you want to start the emptying pump at the right time?
PLUVIO guarantees the emptying of the rainwater first flush tank. This is the electronic panel by Elentek specific for this type of system. At the end of the meteorological event, the rain sensor connected to the panel will start the emptying pump at the end of the preset time.
Compact, economical, very easy to install and program, PLUVIO facilitates the replacement of old panels installed.
From 719 €
EASY INSTALLATION
USER INTERFACE
EXPANDABILITY
EXPANDABILITY
MAIN FEATURES
- LEDs on front of panel for signalling operating status and alarms
- AUTOMATIC - 0 (standby) - MANUAL selector (fixed or pulse)
- PLUVIO PRO 2 motor alternation (can be disabled)
- Immediate engine exchange in case of PLUVIO PRO 2 anomaly
- Dry running protection with: level probes/ float switche
- Up to 4 control inputs: floats/pressure switches
- Clicson thermal pad inputs with automatic reset (can be disabled)
- Current protection delay
- Automatic reset due to minimum current alarm (can be disabled)
- Activation delay from mains return (can be disabled)
- Manual button operation (fixed or momentary)
- Provision for run capacitors for single-phase version (not included)
- Delay timer for pump start at the end of the rain event (settable)
- Rain sensor
ADDITIONAL FUNCTIONS PLUVIO PRO 2
- Duty/standby (can be disabled)
- Immediate motor changeover in case of a fault
VERSIONS
- Power supply 1 phase 100-240Vac 50/60Hz (EASY-Mono)
- Power supply 3 phase 310-450Vac 50/60Hz (EASY-Tri/5.5)
CONTROLS
- Electronic control of maximum current
- Electronic control of minimum current (dry running)
- Failure or incorrect phase sequence control on power supply input (can be disabled)
ALARMS
- Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
- General alarm output contacts
PROTECTIONS
- Auxiliary and motor protection fuses
- Isolator (except for NB code)
- Box in ABS, IP55
MAIN FEATURES
pluvio PRO
pluvio PRO
RS485
(Optional)
RAIN SENSOR
EXPANDABILITY
MODULAR
KEY FEATURES
WHAT CAN'T MISS
APP
COD:
98107
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.
