MAIN FEATURES
- Auxiliaries contacts and circuits in low voltage;
- Normally open contact for start with selector in “Manual” position;
- Normally open contact for min level/pressure;
- Analog input 4-20mA (0-10V on request);
- Selector Auto-0-Man (manual permanent): - Manual: operation at 50 Hz constant with pressure switch control; - Automatic: operation in modulation with analog sensor;
- Electronic frequency inverter with: - Multifunction LCD - Internal ventilation - “PID” regulation - Connection for RS232/485 - 2nd ambient EMC filter - Max distance of the motor: 50 meters
- Auxiliaries and motor protection fuses;
- ABS box, IP54;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
VERSIONS
- SINGLE-PHASE INPUT 230V - THREE-PHASE OUTPUT 230V
- THREE-PHASE 230V INPUT - THREE-PHASE 230V OUTPUT
- 400V THREE-PHASE INPUT - 400V THREE-PHASE OUTPUT
POWER SUPPLY
- Power supply 1~50/60 Hz 230V ±10% - output 3~230V;
- Power supply 3~50/60 Hz 230V ±10% - output 3~230V;
- Power supply 3~50/60 Hz 400V ±10% - output 3~400V
MAIN FEATURES
Minivar
Minivar
KEY FEATURES
Inverter start-up
A frequency converter is an electronic device used to control the rotational speed and torque of an electric motor. The motor, in turn, drives a load (e.g. a pump). A frequency converter converts the mains AC voltage into DC voltage via a rectifier and is stabilised by the DC link capacitor bank. The inverter finally converts the DC voltage back into AC with variable frequency. Frequency inverters for primary water and waste water treatment applications are equipped with various customised functions for controlling single and multi-pump systems.
Components and applications
MINIVAR control panel have a multifunctional display, a manual or automatic selector switch, and a switch-disconnector with door lock system. A terminal block allows connection to external consumers and controls such as pressure switches, float switches, etc.
MINIVAR control panels are optimal in various applications with:
- Industrial water pumps, booster pumps
- Rainwater lifting pumps, irrigation pumps (submersible or surface)
- Submersible pumps, waste water pumps
WHAT CAN'T MISS
CI24V
COD:
98033
External 24Vac input for activation/deactivation of the motor
K3SL
COD:
98007
Kit of 3 level probes (electrodes)
DA-B PRESS
COD:
98063
Stop device for low pressure
RL-…
COD:
98006*
Level relay for automation