Drain

The control panel for sewage systems controlled by float switches

Drain is a specific control panel for sewage systems controlled by float switches. 

General technical features

  • Control unit with Liquid Crystal Display to visualize:

    • voltage

    • frequency

    • current

    • operating status of the system

    • system faults

  • Controller: multilingual, sewage mode operation, digital ON-OFF input (float switches or external controls);

  • Auxiliary users activation in case of fault of the user in operation (2 pumps models);

  • Control of the users individually or in duty standby/assist (2 pumps models);

  • Electronic control of motor overcurrent;

  • Minimum voltage control : 180->415 (depending on the model);

  • Max voltage control: 220->460 (depending on the model);

  • Alarms control: motor in protection, motor overtemperature, board communication, voltage too low/
    high, phase sequence/failure, min/max level;

  • Alarms archive;

  • Isolator;

  • Box in ABS IP55;

  • Ambient temperature: -5/+40 °C;

  • Relative humidity 50% a 40 °C (not condensed).

Download

 

 More info? 

Find out the discounted price dedicated to you

PRIVACY

I declare to be at least sixteen, and if less than sixteen, to have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the  Privacy Policy.

COMMUNICATION

I consent to the processing of my personal data for receiving newsletters, communications via telephone (SMS, WhatsApp, voice call)

Highlights

 

Electronic main board

DRAIN contains an electronic main board with microprocessor and external LCD for reading the parameters  set and the alarms status.
The motor protection fuses are supplied as a standard and can be replaced by circuit breaker on request.
An isolator switch cuts the main power supply input to cut-off voltage to the panel and guarantees max safety when opening the control panel.
 

Main screens

The DRAIN series has a practical LCD display for reading the operating and alarm status, as well as a warning light to indicate the alarm status and programming and command keys on the frontpanel.
The main screen allows you to view the active motors, the input voltage and the total current consumption of the motors.

Set-up

The DRAIN range is designed for the use and control of drainage pumps managed by floats.
Any set-up, control and use operation is done on the frontpanel  without the need to open the enclosure of the panel.
5 languages are available in the software (Italian, English, French, Spanish, German).
The system is simple, fast and intuitive.

Alarms

The DRAIN's electronic board has an alarm output with volt free contacts 5A – 250V.The messages of all the alarm status are shown on the display on the frontpanel: motor in protection, motor overtemperature, voltage too low, voltage too high, phase failure/sequence, max level, min level, boards communication.

 

Applications

Emptying/ Drainage

sewage water 1 pump

DRAIN 1 application for emptying/drenage of sewage water with float switches with trim variation (model DROP). 

Emptying/ Drainage

sewage water 2 pumps

DRAIN 2 application for emptying/drenage of sewage water with float switches with trim variation (model DROP). 

Models

 

Comparison table

Comparison table

Comparison table

 

Accessories

  • CI24V / CI230V

    Comando esterno per attivazione/spegnimento utenza

  • TPL

    Timer pausa/lavoro

  • WT

    Timer settimanale digitale

  • DT

    Timer giornaliero

  • TMF

    Timer multifunzione

  • DBT

    Dispositivo per allarme con batteria in tampone

  • LL

    Allarme lampeggiante luminoso

  • AA

    Allarme acustico 90dB

  • RL

    Level relay for automation

  • K3SL

    Kit 3 sonde di livello unipolari

Connection drawings

 

Discover our products

Find out how we do it

Support

30 Motivated people

The strength of our company is our staff. 30 highly qualified and motivated people who manage even the most difficult challenges by working together, because together nothing is impossible.

About Us:

Address

Via A. Meucci, 5-11, 35028

Piove di Sacco (PD) - Italia

Working      Hours 

Monday          08-12 / 13.30-17.30

Tuesday         08-12 / 13.30-17.30

Wednesday    08-12 / 13.30-17.30

Thursday        08-12 / 13.30-17.30

Friday              08-12 / 13.30-17.30

Saturday        closed

Sunday           closed

Contacts

Copyright 2019 - Elentek srl

VAT no. 04534630282

Cap. Soc. i.v. 100.000€

More info?

We will reply as soon as possible!

PRIVACY

I declare to be at least sixteen, and if less than sixteen to have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

COMMUNICATION

I consent to the processing of my personal data. For the transmission of newsletters, communication via telephone (SMS, WhatsApp, voice call)

MON - FRI 8.00-12.00 and 13.30-17.30