Typical applications

of our electronic control panels

Filling

with float switch and dry running protection by power factor control

1.  SCOUT / SMART EVO 1 / DRYTEK / EXPRESS
2. Tank
3. Start float switch
4. Deep well pump


Suitable panels
The control panels suitable for this application are:
1. SCOUT in filling function and dry running protection by minimum current control
2. SMART EVO 1 in filling function and dry running protection by minimum current control
3. DRYTEK in filling function and dry running protection by power factor control
4. EXPRESS 1 in filling function and dry running protection by power factor control

Pressurization/ irrigation

with pressure switch and level probes

1.  SCOUT / SMART EVO 1 / EXPRESS 1
2. Start pressure switch
3. Single-pole level probes 
4. Deep well pump


Suitable panels
The control panels suitable for this application are:
1. SCOUT in emptying function and dry running protection by level probes 
2. SMART EVO 1 in emptying function and dry running protection by level probes
3. EXPRESS 1 in emptying function and dry running protection by level probes

Pressurization/ irrigation

with pressure switch and dry run protection without probes


1.  SCOUT / SMART EVO 1 / DRYTEK / EXPRESS 1 2. Start pressure switch
3. Deep well pump


Suitable panels
The control panels suitable for this application are:
1. SCOUT in filling function and dry running protection by minimum current control
2. SMART EVO 1 in filling function and dry running protection by minimum current control
3. DRYTEK in funzione riempimento e protezione marcia a secco da controllo cos-fi
4. EXPRESS 1 in filling function and dry running protection by power factor control

Emptying 

clear water

with float switches

1.  SCOUT x2 / SMART EVO 2 / EXPRESS 2
2. Tank
3. Start 2nd motor float switch
4. Start 1st motor float switch
5. Stop motor float switch
6. Surface pumps


Suitable panels

The control panels suitable for this application are:
1. N.02 SCOUT connected in series in emptying function
2. SMART EVO 2 in emptying function and dry run protection by float switches
3. EXPRESS 2 in emptying function and dry run protection by float switches

Pressurization

 with pressure switches and dry run protection by float switches

1.  SCOUT x2 / SMART EVO 2 / EXPRESS 2
2. Start pressure switch
3. Dry run float switch
4. Tank
5. Surface pumps

Suitable panels

The control panels suitable for this application are:
1. n.02 SCOUT connected in series in emptying function
2. SMART EVO 2 in emptying function and dry run protection by float switches
3. EXPRESS 2 in emptying function and dry run protection by float switches

Drainage

sewage water

2 pumps with float switches

1.  DRAIN 2 / SMART EVO 2 
2. Stop float switch
3. Start 1st motor float switch
4. Start 2nd motor float switch
5. Alarm float switch
6. Submersible pumps

Suitable panels

The control panels suitable for this application are:

1.  DRAIN 2 specific for drainage systems
2. SMART EVO 2 in emptying function and dry run protection by float switches

Emptying

with 4-20mA electronic level sensor

1.  EXPRESS 1 / WASTEK 1
2. Electronic level sensor 4-20 mA
3. Surface pump

Suitable panels

The control panels suitable for this application are:
1.  EXPRESS 1 in emptying function
2. WASTEK 1 in emptying function

Pressurization/ irrigation

with 4-20mA electronic level sensor and dry run protection without probes

1.  EXPRESS 1 
2. 4-20 mA electronic pressure transducer
3. Pump with dry run by power factor control

Suitable panels

The control panels suitable for this application are:
1. EXPRESS 1 in emptying function

Emptying

with air pressure sensor

1.  WASTEK 1 
2. Air pressure level sensor (1 m)
3. Surface pump

Suitable panels

The control panels suitable for this application are:
1. WASTEK 1 in emptying operation

Drainage

sewage water

with float switches

 

  1. DRAIN 1 / SMART EVO 1 

  2. Motor stop float switch

  3. Motor start float switch

  4. Alarm float switch

  5. Submersible pump

 

Suitable panels

The control panels suitable for this application are:

​1.  DRAIN 1 specific for drainage system

2. SMART EVO 1 in emptying function and dry run protection by float switches. 

Filling tank

with probes and dry run protection by float switch

  1. SCOUT / SMART EVO 1 / EXPRESS 1

  2. Tank

  3. Level probes for filling

  4. Dry run float switch

  5. Submersible pump

Suitable panels

The control panels suitable for this application are:

1. SCOUT in filling function and dry run protection by float switches
2. SMART EVO 1 in filling function and dry run protection by float switches
3. EXPRESS 1 in filling function and dry run protection by float switches

Filling tank

with float switches and dry run protection by level probes

1.  SCOUT / SMART EVO 1 / EXPRESS 1
2. Tank
3. Float switch for filling
4. Dry run level probes
5. Surface pump

Suitable panels

The control panels suitable for this application are:
1. SCOUT in filling function and dry run protection by level probes
2. SMART EVO 1 in filling function and dry run protection by level probes
3. EXPRESS 1 in filling function and dry run protection by level probes

Pressurization/ irrigation

with pressure switch and dry run protection by float switch

1.  SMART EVO 1 / EXPRESS 1
2. Start pressure switch
3. Dry run float switch
4. Surface pump

Suitable panels

The control panels suitable for this application are:

1. SMART EVO 1 in emptying function with float switch and dry run protection by float switch
2. EXPRESS 1 in emptying function with float switch and dry run protection by float switch

Pressurization/ irrigation 

with pressure switch and dry run by flow switch

1.  SCOUT 
2. Dry run flow switch
3. Filling pressure switch
4. Surface pump

Suitable panels

The control panels suitable for this application are:

1. SCOUT in emptying function with pressure switch and dry run protection by flow switch

30 Motivated people

The strength of our company is our staff. 30 highly qualified and motivated people who manage even the most difficult challenges by working together, because together nothing is impossible.

About Us:

Address

Via A. Meucci, 5-11, 35028

Piove di Sacco (PD) - Italia

Working      Hours 

Monday          08-12 / 13.30-17.30

Tuesday         08-12 / 13.30-17.30

Wednesday    08-12 / 13.30-17.30

Thursday        08-12 / 13.30-17.30

Friday              08-12 / 13.30-17.30

Saturday        closed

Sunday           closed

Contacts

Copyright 2019 - Elentek srl

VAT no. 04534630282

Cap. Soc. i.v. 100.000€

More info?

We will reply as soon as possible!

PRIVACY

I declare to be at least sixteen, and if less than sixteen to have been authorized by the holder of parental responsibility, therefore I consent to the processing of my personal data as indicated in the Privacy Policy.

COMMUNICATION

I consent to the processing of my personal data. For the transmission of newsletters, communication via telephone (SMS, WhatsApp, voice call)

MON - FRI 8.00-12.00 and 13.30-17.30